Hi All,
I want to design DC DC converter as per below specification.
https://www.mouser.in/datasheet/2/277/MP2560_r1.21-1384256.pdf for design.
1. Output : 12V, 6W
2. Peak current : 1.5A for 200ms
Could anybody guide us how do I ensure the peak current requirement for 1.5A @ 200ms
Thanks,
I want to design DC DC converter as per below specification.
https://www.mouser.in/datasheet/2/277/MP2560_r1.21-1384256.pdf for design.
1. Output : 12V, 6W
2. Peak current : 1.5A for 200ms
Could anybody guide us how do I ensure the peak current requirement for 1.5A @ 200ms
Thanks,
Last edited by a moderator: