Hi all,
I have to create a ws2812 SMD LEDs array. when I searched about the resistors to connect it so I found that it needed 470R on Vin pin from 5V and 33R in between Din(another LED) and Dout (First LED) on some Images of LED strip there were capacitors also. So I am confused about what to do. I have created a simple ckt attached to this post. Please guide me.
Here in smd_led,
Pin no1 is Vin
Pin no2 is GND
Pin no.4 is Din
Pin no.5 is Dout.
I have to create a ws2812 SMD LEDs array. when I searched about the resistors to connect it so I found that it needed 470R on Vin pin from 5V and 33R in between Din(another LED) and Dout (First LED) on some Images of LED strip there were capacitors also. So I am confused about what to do. I have created a simple ckt attached to this post. Please guide me.
Here in smd_led,
Pin no1 is Vin
Pin no2 is GND
Pin no.4 is Din
Pin no.5 is Dout.