Hi!
I'm building BMS and looking for a connector with continuing current 3A.
I have tried the https://www.aliexpress.com/item/1005001408683333.html but was a voltage leak.
I need 31 pin but multiply connectors can be used. For example 6+6+6+6+7.

Help me please))

 

You should find something suitable on the DigiKey site??

 

I have found this https://www.aliexpress.com/item/1005001361126346.html

A socket for this connector is vertical but I need angled one.
Is it possible to find angled socket?

PS: I can use any similar connector with a total width of up to 17mm.

 

Found https://www.newark.com/te-connectivity/953486-1/automotive-conn-r-a-hdr-32pos/dp/70AH4306 but to much expensive(((

 

I have found this https://www.aliexpress.com/item/1005001361126346.html

A socket for this connector is vertical but I need angled one.
Is it possible to find angled socket?

PS: I can use any similar connector with a total width of up to 17mm.

Seems to be a variation of standard IDC connectors, you can obtain the right-angle versions.