Hi guys,
I am using an LED driver chip to drive some LEDs ( https://www.adafruit.com/products/1429 ) and it says I do not need any current limiting resistors.
Why is this actually the case? I have been using the chip and the LEDs are fine without resistors but was just wondering how it actually works (what the electronics are behind it!)
Thanks
I am using an LED driver chip to drive some LEDs ( https://www.adafruit.com/products/1429 ) and it says I do not need any current limiting resistors.
Why is this actually the case? I have been using the chip and the LEDs are fine without resistors but was just wondering how it actually works (what the electronics are behind it!)
Thanks