Why doesn't a mobile phone work with the battery removed, but charger connected?

My nice cell did this:

Hardware control in the phone will prevent discharging from the USB bus until software has negotiated 500mA with the host. This control will force a power-up to occur from the battery instead of external power when connected to a host. This means that charging from the host will not be possible if the battery is dead

If the battery has enough capacity to allow a power up to occur when connected to a host, software must immediately negotiate 500mA for charging. If 500mA is granted, then software will continue to drive (some signal) high and begin to charge the battery.

They mention a "factory mode" where powering up without a battery is possible.

So, you can't negotiate the mode of operation when you don;t have power.
 

BR-549

Joined Sep 22, 2013
4,928
How can we discuss this without knowing what we're talking about? Without knowing what an instrument is, and the power it requires. Without knowing the battery type, and without knowing the charger specs.

I think I know what the TS wants, but without knowing what the TS has, It's a waste of time.
 
Top