Hello, what’s the width of this figure?

 

The holes are 10mm and the wall thickness are 2mm, if the figure wasn’t compressed the width would be 26mm (2+10+2+10+2), but what’s the width of the compressed figure?

 

Here's a hint. Consider the red triangle where the corners of the triangle are at the centres of the circles.

 

24.4mm?

 

That's what I make it.

 

The holes are 10mm and the wall thickness are 2mm, if the figure wasn’t compressed the width would be 26mm (2+10+2+10+2), but what’s the width of the compressed figure?

Hi,

That's strange it looks like 24mm wide to me as drawn. It looks like two of the circle edges line up vertically then there are the two borders which adds 4mm, so 10+10+4=24mm.
I guess then that the two circle edges do not line up vertically.

 

Hi,

That's strange it looks like 24mm wide to me as drawn. It looks like two of the circle edges line up vertically then there are the two borders which adds 4mm, so 10+10+4=24mm.
I guess then that the two circle edges do not line up vertically.

Yeah, it doesn't say it is a scale drawing.