Hello and thank you for helping out in advance.
Hope this is posted in the right Forum section.
The connector shown is from a 2024 BMW 4 series. I think it's the lane assist camera behind the mirror.
The problem I have is someone did rip or cut the cables right at the connector and when soldering it breaks with movement. So I need to crimp them on but can not find out what type of connector it is. Maybe someone who knows can pitch in thanks

 

Call the dealer. If you can find the right parts guy, they can trace that connector right back to the manufacturer and perhaps supply you with the OE part number. More likely that it is a proprietary part and you will get nothing. Faster to go to the wreckers and get one from there. Maybe lucky enough it goes back a few years. Short of that, you are into a new harness.

 

Thanks but I work on cars for a living and the oems won't tell you anything other than " Well you need a whole harness " ... In this case that also means headliner removal and eventually also windshield removal because it's a coupe style vehicle. Also did take the pin connector out of the case and did try to use a new DuPont 24awg but does not quiet fit well in the case the body of the connector folds open to release the inner crimp on connectors. Anyway thanks for your time.