My washing machine is broken. So I remove the motor and test it with new and old capacitor. It has three pins lets say it A, C, B.
A for spin clockwise
C for Common
B for spin counter clockwise
I connect one of ac power cable to C/common. Connect both A & B to capacitor's terminals. I then connect the other power cable to A, it spins counter clockwise an then connect it to B and it also spins counter clockwise. What could be wrong? It should be bidirectional motor.

 

The resistance between A-C = B-C is 45 ohm Between A-C is 90 Ohm

 

A to B should be 90 ohm. B to C & A to C should be 45 ohm each. Capacitor goes A to B you wired it wrong.

 

Circuit.

 

Here is circuit using one SPDT SW centre OFF

 

A to B should be 90 ohm. B to C & A to C should be 45 ohm each. Capacitor goes A to B you wired it wrong.

I am so confused. This is exactly how i conect them.
New cap does not help.

Is it possible that the motor is broken?