hey guys,
i wanted to ask a question.
i have a MAP sensor (sensor for cars) which out puts a 0 to 5 voltage. 0v means engine idle air intake in manifold and 5v means full throttle.
the question is how can i amplify this 0 to 5 voltages.
i want to use this 0 to 5 volt as a reference to control a pump PSI. the more voltage goes up the pump works with higher power.
the pump i use is 12 to 24 volts.
so which electronic parts i can use to amplify this signal?
or any other parts that would help me to use this 0 to 5 sensor out put voltage to control pump power.
thank you
i wanted to ask a question.
i have a MAP sensor (sensor for cars) which out puts a 0 to 5 voltage. 0v means engine idle air intake in manifold and 5v means full throttle.
the question is how can i amplify this 0 to 5 voltages.
i want to use this 0 to 5 volt as a reference to control a pump PSI. the more voltage goes up the pump works with higher power.
the pump i use is 12 to 24 volts.
so which electronic parts i can use to amplify this signal?
or any other parts that would help me to use this 0 to 5 sensor out put voltage to control pump power.
thank you