Use of single power supply to a Differential amplifier

Thread Starter

Dad_addy

Joined Apr 12, 2010
4
Can someone out there help me with designing of a differential amplifier that gets its supply voltage from a 9 volts battey. Its specifications are as follows;

gain = 1 or 10
input resistance = 1 Mohms
output resistance = 50 ohms
CMRR = 40 db
Maximum input = +1 0r -1
Maximum output= +10 or-10
BW = 5 Mhz
 

beenthere

Joined Apr 20, 2004
15,819
Do you expect to get an output over a range of +10 volts to -10 volts with only a 9 volt source? You really need to post more details.
 

Thread Starter

Dad_addy

Joined Apr 12, 2010
4
Do you expect to get an output over a range of +10 volts to -10 volts with only a 9 volt source? You really need to post more details.

Hi,

I believe there is something wrong with the question I would prefer to use 12 Volts or 15 Volts. Yes the range is ± 10 Volts (limited at 0.5 Volts into 50 Ω load)
 
Top