Hello. I have a question about connecting USB3 / USB2.
There are 2 microprocessors in my design. The first µP has a USB3 interface and the second µP USB2.
From both microprocessors I route USB to one USB TYPE-C connector, which has pins for USB3 and USB2.
Connect to PC using USB cable Type_C-to-Type_A SS (blue).
Have you seen any Windows or USB standard issues with this configuration?
Can I get interface with both devices simultaneous?
Attached capture shown this connection. Please advice.
There are 2 microprocessors in my design. The first µP has a USB3 interface and the second µP USB2.
From both microprocessors I route USB to one USB TYPE-C connector, which has pins for USB3 and USB2.
Connect to PC using USB cable Type_C-to-Type_A SS (blue).
Have you seen any Windows or USB standard issues with this configuration?
Can I get interface with both devices simultaneous?
Attached capture shown this connection. Please advice.
Attachments
-
9.2 KB Views: 3