Hi, this is my first time posting!
I'm making my own Ultrasonic Pest-Repellent at home but when I plug the board in Q3 which is a TIP29C PNP Tansistor it heats up really fast and the sound that i'm getting is not the right one, the transistor is located inside a H-Bridge that recieves a the signal from a CD4013 Flip-Flop.
I'll attach the circuit's schematic circuit so you can see and tell me what you think is going on in the circuit.
DC +12V.
PD: I used U4:B to ground the second clock, second set and second reset.
Schematic attatched here ↓↓↓↓
I'm making my own Ultrasonic Pest-Repellent at home but when I plug the board in Q3 which is a TIP29C PNP Tansistor it heats up really fast and the sound that i'm getting is not the right one, the transistor is located inside a H-Bridge that recieves a the signal from a CD4013 Flip-Flop.
I'll attach the circuit's schematic circuit so you can see and tell me what you think is going on in the circuit.
DC +12V.
PD: I used U4:B to ground the second clock, second set and second reset.
Schematic attatched here ↓↓↓↓