Hello Guys..

Im trying to fix an audio amplifier but im not sure about the trouble shooting process.

I've measured 2.5V DC on one of the channels.

Any suggestions on where to go from here would be appreciated.

Is it +2.5 or - 2.5v

 

Crosworx
Welcome to the Forum.
You are responding to a post 4.5 years old.

 

The thing to do is start a new thread. The moderators will gladly help out with that and provide a link back to this one. You should provide a schematic diagram so we can see if your amplifier has a single ended supply and is biased at Vcc/2.