Is there anyone who has built the tire pressure monitoring system, I need to know about the pressure bars to set on the pressure sensors https://store.ncd.io/product/ams581...nsor-0-103-4-mbar-0-1-50-psi-i²c-mini-module/ which is interfaced with Arduino Uno, I am trying to make the own pressure monitoring solution and require suggestion to make this kind of function work.

 

hi ronbo,
That 1.5Bar limit is only approx 22 psi, that seems low for a tyre pressures.
E

 

I have not used one, but it looks like the product pictured is the AMS 5812-0015-D which goes to 1.5 psi . From the data sheet, the AMS 5812-1000-D goes to 100 psi (see the table). Am I not reading it correctly?

Edit to add: The code linked is for the AMS5812-0050-D, but it is pretty straightforward

 

I have not used one, but it looks like the product pictured is the AMS 5812-0015-D which goes to 1.5 psi . From the data sheet, the AMS 5812-1000-D goes to 100 psi (see the table). Am I not reading it correctly?

Edit to add: The code linked is for the AMS5812-0050-D, but it is pretty straightforward

That was my read also. The pictured (linked) sensor is a 1.5 PSI sensor. This is the data sheet.

Ron