Thanks, I got a new MOSFET and DIODE in the end,Diode is OK.
Check the new MOSFET before soldering.
and tested them ..both are okay.
I have just put them in... but alas...it is doing exactly the same *boo*
I've retested both, and both are ok...must be something else...
There is a faint burning smell from the motor,
and the round 10p sized capacitor NTC 3D-20 get too hot to touch withing 10 seconds..
working my way through the components, and have found that R3 resistor
(the 470 kilo-ohm one), is reading infinity.
*wow* just replaced the 470kilo-ohm resistor and it seems to be working fine now !
will report back
Cheers
Liam
Last edited: