The sewing machine(efka ab85a) drive it does not recognize the position transmitter

Thread Starter

oumni

Joined Jan 26, 2017
3
Hi
i have problem with this sewing machine drive it does not recognize the position transmitter
the drive is mounted on a 745/28 durkopp adler
 

obombeiro

Joined Mar 22, 2017
2
Good morning so it's so the problem is that the box works with a mechanical pedal but with the signal from the machine controller, and since I do not have a service schematic it is very difficult to solve this problem so the help request thanks

PS- The service scheme was very important
 

aabozid

Joined Aug 4, 2017
1
hello
as i know there's no diagram can see for EFKA control , just we can share our experience to help .
best regards
ashraf
 
Top