Test the analog signal through zigbee receivers without connecting it with Laptop or microcontroller

Thread Starter

daisy56

Joined Mar 30, 2018
8
Hello, I have not used this kind of strategy till now and is kind of very unique for me also, if I connect the ZigBee device(as transmitter) with a temperature sensor(connected on analog pin) and on the endpoint, I have configured the Zigbee receiver as coordinator and placed the same PAN ID which I used in Zigbee transmitter. But the receiver is not connected with laptop or microcontroller, Is it possible to test the transmitting and receiving data(through TX/RX pins) through oscilloscope simulators as well as through analog meter or not?
 
Top