Test the analog signal through zigbee receivers without connecting it with Laptop or microcontroller

Discussion in 'The Projects Forum' started by daisy56, Aug 16, 2018.

  1. daisy56

    Thread Starter New Member

    Mar 30, 2018
    7
    0
    Hello, I have not used this kind of strategy till now and is kind of very unique for me also, if I connect the ZigBee device(as transmitter) with a temperature sensor(connected on analog pin) and on the endpoint, I have configured the Zigbee receiver as coordinator and placed the same PAN ID which I used in Zigbee transmitter. But the receiver is not connected with laptop or microcontroller, Is it possible to test the transmitting and receiving data(through TX/RX pins) through oscilloscope simulators as well as through analog meter or not?
     
Loading...