I have a power supply rated for 85-132 V AC and input current 1.4A.
I bought a plug for it, that is rated 125VAC and 10A.
The power supply will supply 24V to an actuator that is rated for 24VDC and full load 5 A
I also have a switch that is rated for 125V/250V and 15A
DC is 125V and 0.6A
250V and 0.3A
I was thinking I could use the plug for the power supply but I'm not sure if the rating is ok for it. Will the power supply only draw 1.4A and the plug won't oversupply the power supply?
Also is 24V DC supplied from the power supply okay for the switch as well? I need the switch to be instant, and I read that switches are better for AC than DC so I might just supply it with AC, but I need the switch connected to the actuator with a relay
Thank you
I bought a plug for it, that is rated 125VAC and 10A.
The power supply will supply 24V to an actuator that is rated for 24VDC and full load 5 A
I also have a switch that is rated for 125V/250V and 15A
DC is 125V and 0.6A
250V and 0.3A
I was thinking I could use the plug for the power supply but I'm not sure if the rating is ok for it. Will the power supply only draw 1.4A and the plug won't oversupply the power supply?
Also is 24V DC supplied from the power supply okay for the switch as well? I need the switch to be instant, and I read that switches are better for AC than DC so I might just supply it with AC, but I need the switch connected to the actuator with a relay
Thank you