Good afternoon i am senior design student building a power audio amplifier and i'm having problems with my sub woofer circuit, every time i have put voltage to the to activate the pins 5 and 3 either the ic burns up or the 1 ohm resistor burns up. could it be that the 1 ohm resistor needs to be 10 watts rated and that is causing the components to burn or could it the dc power supply i am using instead of 15 V batteries is delivering too much current to the ic pins 3 and 5? or is the proposed circuit has errors in it that is causing the burning of the components. your help would be greatly appreciated. the sub-woofer circuit is attached.
Attachments
-
15.2 KB Views: 15