Hi all
I have a 24v stepper output pin header
I want to replace the single 24v stepper with x2 12v steppers
12v Motor specs are =
Voltage = 12v
Current = 0.4A
Resistance per phase = 30Ω±10%
Inductance per Phase = 37mH±20%
So steppers in series would need?
Voltage = 24v
Current = 0.4A
Resistance per Phase = 60Ω±10%
Inductance per Phase =74mH±20%
Will i need to compensate for any inductive kickback? Will the increase resistance+inductance cause any issues with the driver?
I have a 24v stepper output pin header
I want to replace the single 24v stepper with x2 12v steppers
12v Motor specs are =
Voltage = 12v
Current = 0.4A
Resistance per phase = 30Ω±10%
Inductance per Phase = 37mH±20%
So steppers in series would need?
Voltage = 24v
Current = 0.4A
Resistance per Phase = 60Ω±10%
Inductance per Phase =74mH±20%
Will i need to compensate for any inductive kickback? Will the increase resistance+inductance cause any issues with the driver?