I am wanting to start a project later this year.
I am looking for a stepper motor that can spin anywhere between 300-600Kg at about 30-60RPM.
I know there is a lot of math involved and its something im not good at.
I asked a friend who worked it out at 10,000Nm but i can only find a motor for 50Nm so doesnt sound right to me.
preferably the motor needs to accellarate quite quickly, but if it takes 2-3 seconds to reach 30-60RPM that should be fine.
Can anyone help me selecting a motor if it even exists.
it will be spinning a hollow sphere made from steel with the motor on one side and a bearing on the other.
Thanks for any help you can provide.
I am looking for a stepper motor that can spin anywhere between 300-600Kg at about 30-60RPM.
I know there is a lot of math involved and its something im not good at.
I asked a friend who worked it out at 10,000Nm but i can only find a motor for 50Nm so doesnt sound right to me.
preferably the motor needs to accellarate quite quickly, but if it takes 2-3 seconds to reach 30-60RPM that should be fine.
Can anyone help me selecting a motor if it even exists.
it will be spinning a hollow sphere made from steel with the motor on one side and a bearing on the other.
Thanks for any help you can provide.