I am using labview and I'm using a national instruments cfp-2000 interface. I'm going to upload some pictures. I'm trying to use a relay to connect the valve to the interface. I'm wondering if I'm connecting it correctly. I got the braided red and black wire connected on the sides and the valve wires at the top and bottom. I can't get it to run on labview but the relay starts vibrating when everything is plugged in. Can anyone help.
Attachments
-
419.2 KB Views: 5
-
350.7 KB Views: 5
-
409.7 KB Views: 5
-
461.8 KB Views: 5