Hello my dear friends,my brothers pls help me,i have terriable problem with my slayer exciter Tesla coil,I tried everything to find a solution, but in vain, so I have to ask for your help.Namely, this Tesla tower, I can't solve for almost a year.
Material
Transistor : D2499
https://datasheetspdf.com/mobile-pdf/1030941/ToshibaSemiconductor/D2499/1
Resistor : 3,2 k Om
Secondary winding : 0.3-0.4 mm
Secondary height : 21cm
Secondary diameter : 5cm
Primary winding : 5-6 turns ; 1 square millimeters
Power supply : 15 Volt DC ; 4 amps
There's nothing I didn't try, I rewind the primary,I reversed the polarity of primary , changed the contact points on the transistor, changed the resistors, but nothing helped, the circuit is perfectly connected, there is no error, I tried to add a diode, then two series-connected diodes, then an LED , however, it still doesn't work, when I touch the top of the tower, nothing happens to the LED, it always lights up with the same intensity. I measured the current with a measuring instrument that consumes Tesla's tower, but it's a miserable 70mA.There is almost no electricity.I live in an apartment on the first floor, I guess that's not a problem.The apartments do not have grounding, the neutral wire is connected to the grounding contact.I tried to add 2 series connected diodes between the base and the emitter, the cathode to the base and the anode to the emitter, however again nothing, i added the led diode but it didn't work again. Nothing works, nor is there a spark at the top of the tower, nor are fluorescent lamps lit.
Material
Transistor : D2499
https://datasheetspdf.com/mobile-pdf/1030941/ToshibaSemiconductor/D2499/1
Resistor : 3,2 k Om
Secondary winding : 0.3-0.4 mm
Secondary height : 21cm
Secondary diameter : 5cm
Primary winding : 5-6 turns ; 1 square millimeters
Power supply : 15 Volt DC ; 4 amps
There's nothing I didn't try, I rewind the primary,I reversed the polarity of primary , changed the contact points on the transistor, changed the resistors, but nothing helped, the circuit is perfectly connected, there is no error, I tried to add a diode, then two series-connected diodes, then an LED , however, it still doesn't work, when I touch the top of the tower, nothing happens to the LED, it always lights up with the same intensity. I measured the current with a measuring instrument that consumes Tesla's tower, but it's a miserable 70mA.There is almost no electricity.I live in an apartment on the first floor, I guess that's not a problem.The apartments do not have grounding, the neutral wire is connected to the grounding contact.I tried to add 2 series connected diodes between the base and the emitter, the cathode to the base and the anode to the emitter, however again nothing, i added the led diode but it didn't work again. Nothing works, nor is there a spark at the top of the tower, nor are fluorescent lamps lit.