Signal path?

Thread Starter

Ed Gibbs

Joined May 2, 2015
4
I have a VINCENT SP331MK audio amp. Hybrid/Trans. A German Mfg.
I have diagram the sent me. It has (4) 15AMP pig tail fuses. Yes pig tail.
I've studied the diagram. But they way its laid out I cannot determine if they are in the
Audio out to the speakers are in the direct "signal path."
SEE ATTACHMENT.
Any help greatly appreciated.

Tubes444
 
Last edited:

Kermit2

Joined Feb 5, 2010
4,162
It has flags which identify the fuses are coming from the power transformer. If you will look the flags lettering matches the flags on two of the secondary coils on the transformer.
 

Thread Starter

Ed Gibbs

Joined May 2, 2015
4
It has flags which identify the fuses are coming from the power transformer. If you will look the flags lettering matches the flags on two of the secondary coils on the transformer.
Not to Old to see Flags!! A Kermit2

I saw that. But with this Germans layout Das diagram. Still couldn't determine if there in the final circuit to the RCA Out ( I.e. signal path?)

Thanks,
Tubes 444
 
Top