Hi,
I also have an RS rebadged RSDS 1052DL+ , which is stuck on the boot menu.
Could you assist me please, have already tried the “MATH” button without success.
Thank you.

 

My issue was resolved 24 hours after sending the email. The support team sent me back a ZIP file that seemed to contain a firmware and a U-Boot. All I had to do was copy it onto a USB stick, plug it in, power on, wait a bit, and voilà — the oscilloscope was flashed and fully functional again, as if nothing had happened.
I used this email : support-eu@siglent.com

 

Hi,
I also have an RS rebadged RSDS 1052DL+ , which is stuck on the boot menu.
Could you assist me please, have already tried the “MATH” button without success.
Thank you.

For RS branded products contact Siglent HQ for a recovery package:
support@siglent.com

 

For RS branded products contact Siglent HQ for a recovery package:
support@siglent.com

Thanks for your help. Email sent

 

For RS branded products contact Siglent HQ for a recovery package:
support@siglent.com

Thanks for your help. Email sent

My issue was resolved 24 hours after sending the email. The support team sent me back a ZIP file that seemed to contain a firmware and a U-Boot. All I had to do was copy it onto a USB stick, plug it in, power on, wait a bit, and voilà — the oscilloscope was flashed and fully functional again, as if nothing had happened.
I used this email : support-eu@siglent.com

Thanks for your help, email sent