I was watching this video on the new Ring Video Doorbell 4k that comes with a Mini Speaker.

Go to the Time Stamp 1:04 she shows you after you connect it you can put it up outside the Doorbell Housing Box.

What I do not understand is after you connect the Mini Speaker if you put the Mini Speaker up outside the Doorbell Housing Box it will have the 2. Wires coming from it.

So how can you slide the Doorbell Housing Box Cover back over it if you have the 2. Wires going to the Mini Speaker they will be to thick?

 

If they are actually too thick you can make a slot in the doorbell housing. They may be quite thin and pose no problem.