Hello,
Looking for some guidance in RGB LED selection and circuit design for a circuit board that is being driven by a set LED driver. All the LEDs will be controlled together.
Given Values:
Thanks
Looking for some guidance in RGB LED selection and circuit design for a circuit board that is being driven by a set LED driver. All the LEDs will be controlled together.
Given Values:
- LED Driver LP5569
- Can only use one LED engine (This LED driver has 3 but other two are controlling other LEDs in the design)
- Current 25.5mA per channel (R, G, & B)
- Voltage 4.5V
- RGB LED
- Surface Mount
- QTY 5 or 10 if possible
Thanks