RC shift oscillator using transistor bc547b

Thread Starter

leonel

Joined Aug 31, 2010
9
hi im new in this forum and dont realy knw how it work i need help on build a shift oscillator with a bc547 i realy dont knw how to start. and the requierment are 2v(p-p) frequency 2000hz and using 9v dc
plz help me
 

Audioguru

Joined Dec 20, 2007
11,248
The oscillator is called a Transistor Phase-shift Oscillator.
Google has 112,000 links to schematics and parts lists. The calculation is shown for the frequency.
A few use the BC107 which was the same as a newer BC547.
 

Thread Starter

leonel

Joined Aug 31, 2010
9
plz can u give me some glue how to start the calculation?bcz im doing the research about but im geting nothing much.
 

Audioguru

Joined Dec 20, 2007
11,248

Thread Starter

leonel

Joined Aug 31, 2010
9
thnks for ur help but my problem is i want a frequency of 2000hz and how m i gonna find the value of my Re Rc Rb in my amplifier?
 

Audioguru

Joined Dec 20, 2007
11,248
Re, Rc and Rb are the parts of an extremely simple single transistor amplifier.
The value of Rc is determined by how much supply current will be used and by the load resistance.
Re and the two base bias resistors are simple calculations.
The two base bias resistors in parallel and in parallel with the calculated input impedance of the transistor amplifier should be equal to the R of the RC phase shift parts.

If you cannot do these simple calculations then look in Google for a completed circuit.
 
Top