Hi there - I know basically nothing about this and just hoping someone can quickly take a look at something and help out. I ordered a Halloween costume for my son that has light-up eyeball things that go under a mask (he is going to be a Jawa from Star Wars) and I'm hoping to re-wire the set-up. Here is the costume that I ordered from Amazon:
https://www.amazon.com/Fun-World-Dw...ocphy=9028896&hvtargid=pla-568108278451&psc=1
There is a switch that turns the lights on but currently with the way it's set up, the lights fade on and off like they're on a timer but we prefer to have them lit-up the entire time with no fade in/out.
If I remove the circuit board(s) here and just solder the red wires to each other / black wires to each other, would it remove the fade on/off feature and just provide continuous power to the lights when switched on? I assume so but don't want to break it. There are two little circuit boards and I'm thinking I'd just remove both and solder the corresponding wires together. I also assume I have all this completely wrong since I know basically nothing about any of this.
Pictures below (can provide more photos / specifics if needed):
Thank you in advance for any advice!
https://www.amazon.com/Fun-World-Dw...ocphy=9028896&hvtargid=pla-568108278451&psc=1
There is a switch that turns the lights on but currently with the way it's set up, the lights fade on and off like they're on a timer but we prefer to have them lit-up the entire time with no fade in/out.
If I remove the circuit board(s) here and just solder the red wires to each other / black wires to each other, would it remove the fade on/off feature and just provide continuous power to the lights when switched on? I assume so but don't want to break it. There are two little circuit boards and I'm thinking I'd just remove both and solder the corresponding wires together. I also assume I have all this completely wrong since I know basically nothing about any of this.
Pictures below (can provide more photos / specifics if needed):
Thank you in advance for any advice!