Hello,
I'm working on a problem involving designing an ac integrator driven by a 10-V p-p square wave and using Probe to compare waveforms.
I've drawn out the integrator but for some reason it would not create the waveforms for me and said my circuit had errors. Specifically, "Less than 2 connections at node $N_0004"
I looked over my schematic and it looks fine to me, it matches up with what the integrators look like in my textbook. If I had to take a guess to were it would be wrong, it would be either my VPULSE or the non-inverting input of the op-amp.
Could somebody please help me pinpoint my problem, I'm pretty stumped. I've attached my circuit below. Thank you, I appreciate it.
--
Arthur
I'm working on a problem involving designing an ac integrator driven by a 10-V p-p square wave and using Probe to compare waveforms.
I've drawn out the integrator but for some reason it would not create the waveforms for me and said my circuit had errors. Specifically, "Less than 2 connections at node $N_0004"
I looked over my schematic and it looks fine to me, it matches up with what the integrators look like in my textbook. If I had to take a guess to were it would be wrong, it would be either my VPULSE or the non-inverting input of the op-amp.
Could somebody please help me pinpoint my problem, I'm pretty stumped. I've attached my circuit below. Thank you, I appreciate it.
--
Arthur
Attachments
-
71.5 KB Views: 141