Propex shut off problem

Thread Starter

inabiyouni

Joined Jan 11, 2022
2
Hi
My car has a Propex HS2211
After pressing ignite button, It waits for air pressure check then it ignite and the flame start burning but it shutt off after couple of secs (5 sec).
After few trues it gives me error code with 4 blinks
I tried different gas pressure from 10-13 WC and also as their support team suggested I try to cover the inlet hose partially but nothing change the situation.

I would appreciate your help
 

Thread Starter

inabiyouni

Joined Jan 11, 2022
2
Welcome to AAC!

Does your manual tell you what the 4 blinks mean?
It says that usually the exhaust temp is high and a safety sensor shut off the gas for that. It looks like this model is very sensitive about the exhaust temp.
They do not tell or know much about the issues.
 
Top