hi plz help me The signal does not appear in oscilloscope
Thread Starter Ihab Bmb Bmb Joined Jun 2, 2019 1 Jun 2, 2019 #1 hi plz help me The signal does not appear in oscilloscope Attachments gfhgnfhg.PNG 31.2 KB Views: 29 dsd.PNG 19.4 KB Views: 29
bertus Joined Apr 5, 2008 22,277 Jun 2, 2019 #3 Hello, Read section 15.7.1 of the attached PDF. It covers the wien bridge oscillator and how to stabelize it. Bertus Attachments sloa087_sinewave_oscillators.pdf 120.4 KB Views: 34
Hello, Read section 15.7.1 of the attached PDF. It covers the wien bridge oscillator and how to stabelize it. Bertus
Audioguru Joined Dec 20, 2007 11,248 Jun 2, 2019 #4 Your schematic has a grid all over it which makes wires difficult to see. You are shorting RV1 to ground.
Your schematic has a grid all over it which makes wires difficult to see. You are shorting RV1 to ground.