Hi,
I'm trying to power my 555 circuit with this (will attach scematic) Maxim MAX5024LASA+T. USing this as input can be 10-60V.
But I'm getting variable output. When raising input voltage, the output goes up and down between 3,3 and 9V.
What should I check? I think I have the schematic correct at least?
Can type of load cause this?

 

I see in the https://datasheets.maximintegrated.com/en/ds/MAX5023-MAX5024.pdf written Vout=Vin*(1-R1/R2). Thus, it works exactly like intended by producers.

 

I see in the https://datasheets.maximintegrated.com/en/ds/MAX5023-MAX5024.pdf written Vout=Vin*(1-R1/R2). Thus, it works exactly like intended by producers.

But SET is to ground so it should be fixed 5V