I’m fine.. I need to get out al mosfets out, the fuse T6.3A, bridge rectifier in order to measure them with DMM.

I will let you know about the results

 

Did you measure the resistance of the female connector for the mains in to the PSU, the one on the housing?

 

the power board has issues, some components are over, the female cable has nothing to do with my power board

 

the power board has issues, some components are over, the female cable has nothing to do with my power board

You said the fuse in your receptacle is blowing but the input to the PSU board is open so it can’t be caused by that.

I asked you to check for a short because you said the fuse was blowing.

Good luck.