Dear Team,
There is a pull up resistor at one end i am giving a voltage of +3.3v but while measuring on the other end initial i am getting 1.6v & later after some time i am getting 2.5v that time my secondary device is getting power.
There is a pull up resistor at one end i am giving a voltage of +3.3v but while measuring on the other end initial i am getting 1.6v & later after some time i am getting 2.5v that time my secondary device is getting power.
Attachments
-
9.7 KB Views: 13
-
9.8 KB Views: 13