On my other other post about temperature sensors I forgot about using Pic Micro-controllers with seven segment displays. I found this schematic
in which it tells me to use a Pic16f688. How would I program that without the Pickit 3/2 (for cheap). Thanks,
Bod.

 

Hello,
Of course Proteus let you load the hex file (generated with MPLABX) from the PIC's settings.

In the real world if you don't want to use Pickit 2/3 you will have to use a clone.
simozz

 

Hello,
Of course Proteus ley you load the hex file (generated with MPLABX) from the PIC's settings.

In the real world if you don't want to use Pickit 2/3 you will have to use a clone.
simozz

Thanks for replying, I will look around for a different way.

 

Or you can try this:
http://www.ebay.com/itm/PICkit3-PIC...hash=item58f6f2328d:m:m31ApzsAjGXRbN-oQsCpkvw