Hello all,

I'm currently doing my research on MEMS devices (Thermo-actuator), and I need to do my own PCB to test the functionalities of the MEMS.
However, I lack experience in PCB design, the advice from AI tools does not to be valid and I need real experience from you guys to help.

Below is my current PCB design and wire bonding diagram of the chip, also the specification of voltage and current input. Please have a look on it and do I need to alter anything for it and what should be noticed when working on PCB design?

# PCB design


# Wire bonding diagram:


# Input voltage and current:
Applied voltage of 0.58 V and the total current at the input of the device is 0.5 mA

 

Need way more context to even begin to comment.
Schematics?
What does it do exactly?

 

Need way more context to even begin to comment.
Schematics?
What does it do exactly?

That PCB is used to measure the 40 pin chip, which looks like this. I will apply the input voltage to the chip via the pin on the PCB. The chip looks like below image.

 

Schematic is what we need

 

What we need is the exact part number of the chip.