Hello, I have an RX system shown below where my signal goes threw amplifier mixer and then filter and another amplifier .
Friss formula is not relevant im my case .
the boltsman formula Pnoise=-174dBm+10log(BW)
given the datasheet below How can I know the noise level in the end?
Thanks.
https://www.qorvo.com/products/p/TGA2227
https://markimicrowave.com/products/microstrip/mixers/m1-0818ne-1/datasheet/
https://www.minicircuits.com/pdfs/Z...2hNcdwjar5kAFbhmyih9wNintJh3AEZKXgaVbp7fCCEcH
Friss formula is not relevant im my case .
the boltsman formula Pnoise=-174dBm+10log(BW)
given the datasheet below How can I know the noise level in the end?
Thanks.
https://www.qorvo.com/products/p/TGA2227
https://markimicrowave.com/products/microstrip/mixers/m1-0818ne-1/datasheet/
https://www.minicircuits.com/pdfs/Z...2hNcdwjar5kAFbhmyih9wNintJh3AEZKXgaVbp7fCCEcH
Attachments
-
314.6 KB Views: 5