Hi everyone...
First off, I have no experience whatsoever in circuitry except I know what a capacitor and a resistor are. I can do a little household wiring, but that's the extent of my electrical knowledge, so please, if you respond, please make sure that a beginner could understand!
I have a ballast for a large security light which floods light into the area behind my business (fenced-in parking area). The other day, the light stopped working. I was not around to determine if there was a loud bang or light, etc. I tried using a different bulb, but to no avail.
Well, I like working on projects myself, and this light isn't an emergency, so instead of getting a new one, I decided to take the ballast apart.
Here is what I have, and what I saw. If it's not enough, I can take pictures which might help, just let me know:
It is a 600 watt ballast, and it's supposedly an 'electronic' ballast, which I guess is a new design.
I took the cover off and unscrewed the circuit board, which has lots of things ... I kept looking around the entire board for any sign of damage... I finally found something! There is a small space on the circuit board with a little bit of grey ash looking stuff, like something blew out! And if you look closely, there are two wires sticking out of the circuit board, but they connect to nothing. It looks like the two wires that come out of the board and connect to something like a resistor or capacitor, except in this case, there is nothing there. I looked around the case, and could not find whatever it was that blew up! It must have disintegrated. The only clue as to what it was is a 3 letter code printed on the circuit board: BXS.
I don't know what a BXS is! I can tell you some more details. I followed the three input wires (white, black and green) and they enter the board, and following their path (I hope I followed the path correctly) they first enter a yellow box. There is a large yellow capacitor soldered in front of the box, but the circuit path that the black wire follows also connects to this yellow box. The markings on the box are:
1uF K 275V ~
MKP X2 40/85/21
EN132400 250V~
Following the path the black wire takes, we then get to the infamous 'BXS' which has been blown apart! After the BXS, the path goes through 2 big capacitors and then it goes on through a lot of circuits that are hard to follow.
Can someone please tell me what a BXS is, what could have caused the BXS to blow up, has it damaged other parts and where can I get a replacement BXS?
Sorry for the long post!
Thank you.
First off, I have no experience whatsoever in circuitry except I know what a capacitor and a resistor are. I can do a little household wiring, but that's the extent of my electrical knowledge, so please, if you respond, please make sure that a beginner could understand!
I have a ballast for a large security light which floods light into the area behind my business (fenced-in parking area). The other day, the light stopped working. I was not around to determine if there was a loud bang or light, etc. I tried using a different bulb, but to no avail.
Well, I like working on projects myself, and this light isn't an emergency, so instead of getting a new one, I decided to take the ballast apart.
Here is what I have, and what I saw. If it's not enough, I can take pictures which might help, just let me know:
It is a 600 watt ballast, and it's supposedly an 'electronic' ballast, which I guess is a new design.
I took the cover off and unscrewed the circuit board, which has lots of things ... I kept looking around the entire board for any sign of damage... I finally found something! There is a small space on the circuit board with a little bit of grey ash looking stuff, like something blew out! And if you look closely, there are two wires sticking out of the circuit board, but they connect to nothing. It looks like the two wires that come out of the board and connect to something like a resistor or capacitor, except in this case, there is nothing there. I looked around the case, and could not find whatever it was that blew up! It must have disintegrated. The only clue as to what it was is a 3 letter code printed on the circuit board: BXS.
I don't know what a BXS is! I can tell you some more details. I followed the three input wires (white, black and green) and they enter the board, and following their path (I hope I followed the path correctly) they first enter a yellow box. There is a large yellow capacitor soldered in front of the box, but the circuit path that the black wire follows also connects to this yellow box. The markings on the box are:
1uF K 275V ~
MKP X2 40/85/21
EN132400 250V~
Following the path the black wire takes, we then get to the infamous 'BXS' which has been blown apart! After the BXS, the path goes through 2 big capacitors and then it goes on through a lot of circuits that are hard to follow.
Can someone please tell me what a BXS is, what could have caused the BXS to blow up, has it damaged other parts and where can I get a replacement BXS?
Sorry for the long post!
Thank you.