Hello guys!
I am designing driver circuit for a 3 HP dc motor.I am using the IRF2807Z NMOS
and DSEI60-10 as Freewheeling diode.
The power is supplied through batteries connected in series i.e. 60V i/p is available.
I am currently going just for a simple chopper circuit i.e. class A chopper circuit.
i have attached schematic.
please help me correct the design if it has any problems and suggest improvements.
i dont have many components and they are not readily available so I need the help guys.
Thanks in advance!
edit:last time the mosfet blew with sparks thats why need to do it carefully this time.
I am designing driver circuit for a 3 HP dc motor.I am using the IRF2807Z NMOS
and DSEI60-10 as Freewheeling diode.
The power is supplied through batteries connected in series i.e. 60V i/p is available.
I am currently going just for a simple chopper circuit i.e. class A chopper circuit.
i have attached schematic.
please help me correct the design if it has any problems and suggest improvements.
i dont have many components and they are not readily available so I need the help guys.
Thanks in advance!
edit:last time the mosfet blew with sparks thats why need to do it carefully this time.
Attachments
-
4.6 KB Views: 75
Last edited: