I have a Sony expira C4 with a little problem.
The phone is grate but the signal is a bit of a problem, I have to twist or bend the phone to get signal back when it's drops out.
So my guess is that there is a loose connection on the logic board but I don't really know where to start looking.
I've tried replacing the antenna but I'm still having the same problem.
I'm hoping that there may be a solder joint fail some where, so I can just make good on the connection and not have to reflow the hole board.
Any help and advice would be great thanks.
The phone is grate but the signal is a bit of a problem, I have to twist or bend the phone to get signal back when it's drops out.
So my guess is that there is a loose connection on the logic board but I don't really know where to start looking.
I've tried replacing the antenna but I'm still having the same problem.
I'm hoping that there may be a solder joint fail some where, so I can just make good on the connection and not have to reflow the hole board.
Any help and advice would be great thanks.