Hello there
I am urgently looking for the codes for PIC16F628..
Two switches SW1 and SW2 simulate a window and door respectively.
In the armed mode: If a window switch trigged, system immediately should be alarmed (setting LD1) and if door switch is trigged, system shows a 3^8 delay to alarm (setting LD2)
The "armed" mode: Controls by SW3 and SW4 after 4^8 sets "disarmed" mode.
In case of triggering window, binary value 30 and triggering door, binary value 40 should be written in EEPROM in address h.
I am urgently looking for the codes for PIC16F628..
Two switches SW1 and SW2 simulate a window and door respectively.
In the armed mode: If a window switch trigged, system immediately should be alarmed (setting LD1) and if door switch is trigged, system shows a 3^8 delay to alarm (setting LD2)
The "armed" mode: Controls by SW3 and SW4 after 4^8 sets "disarmed" mode.
In case of triggering window, binary value 30 and triggering door, binary value 40 should be written in EEPROM in address h.
Last edited: