I have a proform treadmill with a
mc2100-els-18W circuit boars
which trips the fuse each time you press start.
Press start > track gives a slight judder (less than a second)> fuse blows
Ive tested the motor with a 18v battery and it ran.
Runs fine with power lead disconnected on motor.
Purchased a replacement circuit board and fitted. Track ran for 1 to 2 mins at slow speed but then slowed and blew the fuse again.
Now its back to Press start > track gives a slight judder (less than a second)> fuse blows
Does this mean this board is faulty now too because it did work initially? Any ideas?
mc2100-els-18W circuit boars
which trips the fuse each time you press start.
Press start > track gives a slight judder (less than a second)> fuse blows
Ive tested the motor with a 18v battery and it ran.
Runs fine with power lead disconnected on motor.
Purchased a replacement circuit board and fitted. Track ran for 1 to 2 mins at slow speed but then slowed and blew the fuse again.
Now its back to Press start > track gives a slight judder (less than a second)> fuse blows
Does this mean this board is faulty now too because it did work initially? Any ideas?