Thank you for reply @BR-549, but i'm using 50 ohm leads.

 

Here you go: https://imgur.com/a/I5b53p4, i have used aluminum rod which is next to impossible to solder to, so i've used a metal clamp configuration to connect the cable to the radiator/driven element.

Because you are using a folded dipole, a coaxial balun is probably the best approach. Check out this solution:

https://vk1sotaon23cm.wordpress.com/2018/03/03/antenna-project-2-4-ghz-13cm-yagi-for-sota/

 

Sorry.
Jamming devices are specifically prohibited by the site’s TOS/UA.

Restricted topics. The following topics are regularly raised however are considered "off-topic" at all times and will result in Your thread being closed without question:

• Any kind of over-unity devices and systems
• Devices designed to electrocute or shock another person
• LEDs to mains
• Any kind of jammers (ie - Phone jammers)
• Rail guns and high-energy projectile devices
• Transformer-less power supplies

Closed