Hi I'm working on a project where I want to be able to control 6, 5V rated push/pull solenoids with a raspberry pi 3 model B. I used circuit IO to layout the circuit diagram needed but I want to make the project portable. And since the current draw from one solenoid is 1.1A, total current draw from 6 of them is 6.6A that means I would need a (6.6A*5V=33W) 33W source to power all of the solenoids and a separate source for the raspberry pi 3 which draws 3.4W. My question is how would I power them in order to make the project portable ?
Circuit IO diagram --> https://www.circuito.io/app?components=9443,11015,11015,11015,11015,11015,11015,200000
5v Solenoid --> https://www.adafruit.com/product/2776
Circuit IO diagram --> https://www.circuito.io/app?components=9443,11015,11015,11015,11015,11015,11015,200000
5v Solenoid --> https://www.adafruit.com/product/2776