I have been trying to find information about the land pattern/footprint associated with the part linked below (datasheet also attached if needed)...

http://www.macomtech.com/High%20Power%20Transistor%20Modules?partNum=MAPM-020512-010C00&searchType=ExactMatch

I have a request for the info from M/A-COM, but haven't heard back. I was wondering if anyone has had experience with a similar part? Or knows what the footprint should look like? Thanks everyone.

 

If you can't find the part in a device library, the PDF gives the pin spacings and offset from the case edge. Place pads on those spacings and print the pattern. Check to see if the pads match the pins.