I'm trying to protect the inputs of a 16bit ADC (ADS1115) that will be powered by 5V, and if I understand the spec sheet right, it will have an absolute max input range of -0.3V to +5.3V.
I kind of care about resolution (which will be 0.076mv) but it's not critical to be super low noise, but would prefer to stay under 1mv noise.
What would be a reasonable solution here?
I kind of care about resolution (which will be 0.076mv) but it's not critical to be super low noise, but would prefer to stay under 1mv noise.
What would be a reasonable solution here?