Hi All. In the pic below, you see an Electronics Learning Lab. It comes with a manual, which if used properly, will teach you the basics of electronics, with this black plastic module being the 'lab' element.
Does anyone know or has anyone come across anything similar to this module, that will help learn Basic Wireless/Radio Transmission and Receiving concepts?

(Maybe a kit with small antennas for receiving and crystals for transmitting etc. )
Ty!

 

Radio circuits beyond AM broadcast band do not take well to breadboards. There is too much stray capacitance, which interferes with the circuit operation.

 

I am the OP. This is the closest I could find for a training kit.

https://aetlabs.com/wp-content/uploads/datasheet_Antenna58207469-8092_en_120V_60Hz-1.pdf

 

RF building and construction training can be expensive because of the measurement tools needed.

The parts for basic stuff can be pretty cheap combined with a cheap Vector Network Analyzer. You need to understand RF theory first.
https://www.amazon.com/nanovna-Semiconductor-Products-Analyzer-Attenuator/dp/B0C3ZM1QF3
https://www.amazon.com/s?k=RF+Demo+...XRMWSCG0JJ&sprefix=rf+demo+kit,industrial,173

 

Go get yourself a "pocket" FM radio and make a battery powered FM transmitter. Then you can demonstrate some aspects of RF propagation and circuitry.

FKBTL4QHXHREEN5.jpg

 

I am the OP. This is the closest I could find for a training kit.

https://aetlabs.com/wp-content/uploads/datasheet_Antenna58207469-8092_en_120V_60Hz-1.pdf

That kit is for microwave transmission. Quite different from what we normally call RF.