I'm Driving 12V , 0.3 Amp motor by using L293d.
i have given 5v to Vcc1 by an arduino where as 12v from a battery to Vcc2
i'm getting just 5v on to the o/p pins 2 respectively where as i need at-least 12V for the motor drive.
Connections are as follows:
Enable Pin , Vcc1 are shorted together and connected to 5v of arduino.
Vcc2 is connected to battery
all the grounds are connected together.
i'm giving i/p directly from 5v , As well as i've tried giving it from arduino too.!!
Help pls..
i have given 5v to Vcc1 by an arduino where as 12v from a battery to Vcc2
i'm getting just 5v on to the o/p pins 2 respectively where as i need at-least 12V for the motor drive.
Connections are as follows:
Enable Pin , Vcc1 are shorted together and connected to 5v of arduino.
Vcc2 is connected to battery
all the grounds are connected together.
i'm giving i/p directly from 5v , As well as i've tried giving it from arduino too.!!
Help pls..
